Analog Cards
Digital PRI Cards
Pre-Installed Asterisk Hardware
|
|
|
The Digium ® TDM410 is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.
Overview:
Using Digium's Asterisk® software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system.
Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410 or other Digium analog interface cards.
Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules. |
|
|
The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines.
Overview:
The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the TDM800P reduces part complexity, cable clutter, and points of failure.
The TDM800P contains two module banks. Each bank supports up to four analog interfaces. The module banks may be filled either with one standard Digium® quad analog module (FXS - S400M, FXO - X400M), or up to two standard Digium® single analog modules (FXS- S110M, FXO - X100M) enabling the creation of any combination of ports.
The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both FXO and FXS interfaces.
If the hardware echo cancellation module is not installed, the TDM800P may be used in conjunction with Digium's High Performance Echo Cancellation (HPEC) software, a commercial and toll quality hybrid echo cancellation solution. Digium's HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software.
Using this card in concert with Digium's Asterisk® software, standard PC hardware, and the Linux® OS, you can create SME or SOHO telephony environments capable of satisfying the needs of small or medium business applications at an industry-leading price.
|
|
|
The Wildcard TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines.
Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system.
Key Features:Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The quad-FXO and quad-FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both FXO and FXS interfaces. Scaling of this solution is accomplished by adding additional TDM2400P cards.
Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.
|
|
